Poor Water Flow

If the jet pressure seems weaker than normal, or you are experiencing a LF (low flow indicator) on the control panel, check the filter to see if it is dirty.

  1. First make sure there is nothing that can be pulled into the suction pipe before removing the filter, then remove the filter and see if you have a noticeable increase in water flow. If so the filter needs to be cleaned. Refer to the owner’s manual for proper filter care.
  2. Make sure the service valves on the pump are open all the way.
  3. If the flow is still decreased there may be something stuck inside the pump impeller. Shut off the power to the spa and remove the pump / motor and inspect the impeller to the pump for debris.